Scaling up a biological product
It works in the lab. Now it has to become a line, and almost nothing that made it work in a shake flask survives the fermenter intact. This path is the work that sits between a result and a production process.
Tell us about your processThree points where things stall
Scale-up does not break where you expect it to. Which of these three is yours decides where the first phase concentrates the effort.
You have a strain and a lab titre
The number is there, but it was measured in a shake flask, from a fresh vial, once. Scale asks for reproducibility before it asks for yield.
You have a process that loses ground in the fermenter
Oxygen transfer, mixing, heat removal and feeding profile all behave differently as volume grows, and that is usually where the titre goes.
You have a production that has to start
You need a pilot batch, a dossier and conditions written well enough for the process to run where it has to run, in other hands too.
Contract manufacturing
Beyond development, we produce batches in our own plant up to 100 litres and, beyond that, with our production partners up to 50 m³, with the same team that developed the process.
We also process the client’s liquid fractions: membrane concentration and spray drying.
How we get there
The path crosses several development areas, in this order. Where you enter depends on how well defined what you already have is.
The strain holds at scale
Stability across generations, documented identity and a cell bank you can restart from identically every time. Without this, every batch is a new experiment.
→ Strain identification and bankingThe upstream process
Medium, feeding strategy, induction and critical parameters, from shake flask to one hundred litres, with reproducibility as the stated objective.
→ Fermentation process developmentRecovery
Downstream has to be sized on the broth the fermentation actually produces, not on the one it produced in a flask: recovery, clarification, concentration, purification.
→ Purification process developmentThe final form
If the product is live or fragile, this is where shelf life is decided: drying, protectants and stability studies with scheduled time points.
→ Formulation and stabilisationIntegration and transfer
End-to-end mass balance, robustness, cost of production and the package that lets the process run somewhere else.
→ Integration, scale-up and technology transferWhat we measure
At the target scale, different numbers matter from the ones that mattered in the lab. These are the ones we report.
- Titre and yield across scales — measured with the same method, otherwise the comparison does not exist
- Productivity — product per litre and per hour, which is what a plant is sized on
- Batch-to-batch reproducibility — replicate batches, with the spread declared instead of the best run
- Strain stability — performance held across generations, not measured once
- Robustness — how far conditions can drift before the result moves
- Downstream behaviour — on the real broth, with its viscosity and its impurities
- Finished product stability — in the format and for the time the market requires
- Cost of production — at the target scale, with the items that actually weigh
What it takes to start
What you bring
- The strain or production system you have today
- The laboratory data, with the methods used to obtain it
- The product specification and the target format
- Annual volumes and the scale you have to produce at
What you take away
- The defined process, with conditions and the ranges they hold in
- A pilot batch when the project reaches that point
- The dossier in the form your technical file needs
- The transfer package towards production
Let us start from the point where the process stalls
Tell us how far you have got, with which numbers, and what scale you have to reach. We will tell you what is missing and what the first phase would look like.
Tell us about your process