Industrial biotechnology R&D services
We develop industrial bioprocesses from the organism to the finished product: the strain or the enzyme that has to produce, the reaction that puts it to work, the purification that separates it, and the analytical methods that put a number on all of the above. Thirteen services in seven development areas, used on their own or in sequence, always with industrial scale as the starting constraint.
Tell us about your projectWhere your project is today
You do not need to know which service you need. You need to know where you are — the rest comes out of the first conversation.
You have an idea and no process
The molecule is defined and there is nothing around it yet. It starts with a feasibility that says early whether the route pays, then the organism or the catalyst, then the reaction.
You have a process that does not deliver
Yield, by-products or cost off target. The limit can be the strain, the conditions or the downstream: first we measure where it actually sits, then we work where it matters.
You have a process that has to move
It works here and has to run somewhere else — your plant, or a contract manufacturer. Industrialisation, technology transfer, and the documentation that lets the result survive the move.
Three recurring situations, told in full: what gets tackled, in what order, and with which numbers it closes.
How a project runs
It holds for all nine services. Three stages, each ending in a decision rather than a report; how long each takes depends on the complexity, and we size it after the first conversation, not before.
Proof of concept
The binary question: does this route work? Screening, first trials, a number measured with a method we trust. The output is a go or a no-go, and when it is no-go we say so early rather than spend the budget finding out slowly.
Optimisation
We push the variable that matters: the organism, the conditions, the catalyst or the purification sequence. Every round is measured against the same analytical baseline, so an improvement is an improvement and not a difference in how it was measured.
Industrialisation
Behaviour at scale, reproducibility batch to batch, process cost, and the conditions written down well enough to survive the move into production.
Seven development areas
Thirteen services, organised by the process stage they act on. Used on their own or in sequence.
Biological system development
The organism or the catalyst that has to produce: choosing it, improving it and documenting it until its behaviour is repeatable.
Upstream process development
Putting the organism to work: medium, feeding strategy, critical parameters and behaviour at scale.
Biocatalytic process development
The reaction: free or immobilised enzyme, the conditions around it, and reuse of the catalyst.
Downstream process development
Recovery, clarification, concentration, purification and polishing, to the specification and at a cost the process can carry.
Formulation and stability development
Giving the product a handleable, dosable form and a shelf life that is demonstrated rather than promised.
Analytical development and characterisation
The numbers everything else rests on, from in-process controls to product release.
Integration, scale-up and technology transfer
Putting the parts together and asking them to hold up against scale, cost and the variability of real production.
Applications
Projects that cut across areas and start from a market question rather than a process stage.
The laboratory behind it
Equipment
| Fermentation | Applikon and Biostream fermenters, from shake flasks up to 100 litres, and up to 50 m³ with our manufacturing partners |
| Purification | ÄKTA chromatography systems, and dead-end and tangential flow filtration |
| Analytics | Agilent and Shimadzu instrumentation: preparative HPLC, UPLC with diode array, fluorescence and refractive index detection, GC with mass spectrometry and headspace, spectrophotometers and titrators |
Download the services overview
Fill in the form to receive the BIOINDUSTRY brochure with the detail of each service.
Start from where you are
Tell us what the process has to make, where you stand today and the scale you are aiming at. We will tell you which service makes sense first and what the first stage would look like.
Tell us about your project